Search Results

Standard

Aluminum Alloy, Extrusions 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T6511) Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Precipitation Heat Treated

2024-03-08

WIP

AMS4173H

This specification covers an aluminum alloy in the form of extruded bars, rods, wire, profiles, and tubing. These extrusions have been used typically for parts requiring moderate strength and where distortion during machining must be minimized, but usage is not limited to such applications.

Standard

Aluminum Alloy, Rolled or Cold Finished Bars and Rods, (7075-T651), Solution and Precipitation Heat Treated

2024-03-04

CURRENT

AMS4123L

This specification covers an aluminum alloy in the form of bars and rods in the sizes and shapes described in 3.3.1 (see 8.7).

Standard

Aluminum Alloy Tubing, Seamless, Drawn 1.8Cu - 1.0Mg - 0.8Si - 0.20Cr Solution Heat Treated, Stress-Relieved by Stretching, and Aged (2013-T6511)

2024-03-01

CURRENT

AMS4002B

This specification covers an aluminum alloy in the form of seamless, drawn tubing having nominal wall thickness of 0.120 to 0.400 inch (3.00 to 10.00 mm), inclusive (see 8.5).

Standard

Aluminum Alloy, Sheet and Plate, 6.3Cu - 0.30Mn - 0.06Ti - 0.10V - 0.18Zr, Solution Heat Treated, Cold Worked (8%) and Naturally Aged (2219 -T37)

2024-03-01

CURRENT

AMS4600B

This specification covers an aluminum alloy in the form of sheet and plate 0.020 to 5.000 inches (0.51 to 127.00 mm) in nominal thickness (see 8.5).

Standard

Aluminum Alloy, Forgings and Rolled or Forged Rings, (6061-T6), Solution and Precipitation Heat Treated

2024-03-01

CURRENT

AMS4127L

This specification covers an aluminum alloy in the form of die forgings not over 4 inches (102 mm) in nominal thickness at time of heat treatment , hand forgings with as-forged thickness not exceeding 8 inches (203 mm) and the cross-sectional area not greater than 256 square inches (1652 cm2), forged or rolled rings 3.5 inches (89 mm) and under in nominal thickness at time of heat treatment and having an OD-to-wall thickness ratio of 10:1 or greater, and stock of any size for forgings and rings (see 8.6).

Standard

Aluminum Alloy, Centrifugal Castings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (709.0-T61) Hot Isostatically Pressed, Solution and Precipitation Heat Treated

2024-02-27

CURRENT

AMS4406B

This specification covers an aluminum alloy (see 8.5) in the form of centrifugal castings.

Standard

Brass Tubing, Seamless, 66.5Cu - 33Zn - 0.45Pb, Annealed

2024-02-13

WIP

AMS4554D

This specification covers one grade of brass in the form of seamless tubing.

Standard

Forgings, Magnesium Alloy, 5.5Zn - 0.45Zr (ZK60A-T5), Precipitation Heat Treated

2024-02-13

WIP

AMS4362J

This specification covers a magnesium alloy in the form of die forgings 3 inches (76 mm) and under in nominal thickness at time of heat treatment, hand forgings 6 inches (152 mm) and under in nominal thickness, and forging stock of any size (see 8.5).

Standard

Aluminum Alloy, Sheet and Plate, Alclad, 4.4Cu - 1.5Mg - 0.60Mn (2024, -T3 Sheet/-T351 Plate with 1-1/2% Alclad), Solution Heat Treated, Cold Worked and Naturally Aged

2024-02-13

WIP

AMS4041U

This specification covers an aluminum alloy in the form of sheet and plate alclad two sides, over 0.187 to 1.000 inch (over 4.750 to 25.40 mm) in nominal thickness, supplied in the -T3/-T351 temper.

Standard

Aluminum Alloy Bars, Rods, and Wire Rolled or Cold Finished, and Rings, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6, 7075-T651), Solution and Precipitation Heat Treated

2024-02-13

WIP

AMS4122N

This specification covers an aluminum alloy in the form of rolled or cold finished bars, rods, and wire, and of flash welded rings conforming to the dimensions listed in Table 2 (see 8.4).

Standard

Aluminum Alloy, Alclad Sheet, 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024-O), Annealed, Fine Grain

2024-02-13

WIP

AMS4274C

This specification covers an aluminum alloy in the form of sheet 0.009 to 0.126 inch (0.23 to 3.20 mm) inclusive, in nominal thickness, alclad.

Standard

Aluminum Alloy, Rolled or Cold Finished, Bars and Rods, 12.2Si - 1.0Mg - 0.90Cu - 0.90Ni (4032-T651), Solution Heat Treated, Stress Relieved, Artificially Aged

2024-02-13

WIP

AMS4319D

This specification covers an aluminum alloy in the form of bars and rods 0.750 to 3.500 inches (19.05 to 88.90 mm), inclusive, in nominal diameter or least distance between parallel sides (see 8.5).

Standard

Castings, Sand, Magnesium Alloy 5.1Y - 3.0Re - 0.70Zr (WE54 - T6) Solution and Precipitation Heat Treated

2024-02-13

WIP

AMS4426C

This specification covers a magnesium alloy in the form of sand castings. These castings have been used typically for parts requiring high yield strength up to 570 degrees F (299 degrees C) and excellent corrosion resistance, but usage is not limited to such applications.

Standard

Magnesium Alloy, Sand Castings, 4.0Y - 2.3Nd - 0.7Zr (WE43B - T6), Solution and Precipitation Heat Treated

2024-02-13

WIP

AMS4427E

This specification covers a magnesium alloy in the form of sand castings.

Standard

Copper Alloy (Brass), Sheet, Strip, and Plate, 70Cu - 30Zn, Annealed (OS035)

2024-02-13

WIP

AMS4505M

This specification covers a copper-zinc alloy (brass) in the form of sheet, strip, and plate.

Standard

Copper Wire, Bare, High Purity

2024-02-13

WIP

AMS4700F

This specification covers one type of copper in the form of wire.

Standard

Brass, Wire, 65Cu - 35Zn, Eighth-Hard (H00)

2024-02-13

WIP

AMS4713H

This specification covers one type of brass in the form of wire.

Standard

Rings, Sealing, Cast Leaded-Tin Bronze, 80Cu - 16Sn - 5Pb, As Cast

2024-02-13

WIP

AMS7320H

This specification covers a cast leaded-tin bronze in the form of sealing rings.

Standard

Magnesium Alloy, Sand Castings, 2.8Nd - 1.4Gd - 0.4Zn - 0.6Zr (EV31A - T6), Solution and Precipitation Heat Treated

2024-02-13

WIP

AMS4429C

This specification covers a magnesium alloy in the form of sand castings.

Standard

Brass, Naval, Bars and Rods 60.5Cu - 38.7Zn - 0.8Sn, Half Hard (H02)

2024-02-13

WIP

AMS4611K

This specification covers a copper alloy (naval brass) in the form of bars and rods. These products have been used typically for automatic screw machine parts, but usage is not limited to such applications. These products have better corrosion resistance than AMS4610 but are less readily machinable.